MANITOBA REFERENCE NUMBER: MB-MBPB-AAY-00050
ISSUING DEPARTMENT: Procurement and Supply Chain
DATE ISSUED: 04/09/2024
ISSUED BY: Darren Derksen
TELEPHONE: 204 794-3395
The Government of Manitoba (Manitoba) is requesting bid submissions for
the Supply and
Delivery of Traffic Sign Hardware on an "as and when" requested basis,
for a 2-year term from October 10, 2024 to October 09, 2026, with option
to extend for 3 additional 1 year periods
Solicitation Contact
For the purposes of this procurement process, the #Solicitation Contact#
will be:
Contact Name: Darren Derksen
Contact Email: bids@gov.mb.ca
For inquiries, email subject line shall be the SOLICITATION NUMBER as
provided in the first page of this document. Vendors and their
representatives are not permitted to contact any employees, officers,
agents, elected or appointed officials, or other representatives of
Manitoba, other than the Solicitation Contact, concerning matters
regarding this Solicitation. Failure to adhere to this rule may result
in the disqualification of the Vendor and the rejection of the Vendor#s
Submission.
TO BE DELIVERED ON AN "AS AND WHEN" REQUESTED BASIS FOR THE PERIOD Oct
10, 2024 to Oct 9, 2026
The delivery date (if shown is actually the end of the contract)
F.O.B. DESTINATION, FREIGHT PREPAID TO:
TO BE ADVISED
This procurement is subject to Canadian Free Trade Agreement.
SUBMISSION TERMS AND CONDITIONS:
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Vendor's e-mail address: (if available) ____________________
Quantity clarification: quantity listed contains 2 or 3 decimals.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 09/10/2026
600.000 Meter GSIN: N9905MATERIAL: 18995
I BEAM, ALUMINUM, 10 IN ALCAN DIE #28017 ALLOY #6351-T6, 12 M LENGTH
please refer to the attached specification document
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 20 09/10/2026
200.000 Meter GSIN: N9905MATERIAL: 18962
I BEAM, ALUMINUM, 7 X 4 INCH, ALCAN DIE #28011, ALLOY #6351-T6 OR
6061-T6, IN 12 M LENGTHS
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 30 09/10/2026
600.000 Meter GSIN: N9905MATERIAL: 18991
I BEAM, ALUMINUM, 2 1/2 IN, 6 METER LENGTHS,
ALCAN DIE #28001, ALLOY #6351-T6 OR 6061-T6
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 40 09/10/2026
12,000.00 Each GSIN: N9905MATERIAL: 18952
CLIP, POST, 1 3/4 INCH, ALUMINUM, PANEL CLIP LOCKNUT 3/8 INCH - 16, 100
PER HEAVY DUTY BOX, PER MANITOBA INFRASTRUCTURE AND TRANSPORTATION
SPECIFICATION 18952_TE-045i
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 50 09/10/2026
16,000.00 Each GSIN: N9905MATERIAL: 18954
CLIP, PANEL, ALUMINUM, 38MM LONG X 45 MM WIDE, COMPLETE WITH TWO 11MM
HOLES ON VERTICAL CENTER LINE WITH CIRCUMFERENCE 12MM APART, 100 PER
HEAVY DUTY SEALED BAG, AS PER MANITOBA INFRASTRUCTURE DRAWING
18954_TE-045H,
ALCAN SHAPE #15237, ALLOY #6351-T6
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 60 09/10/2026
15,000.00 Each GSIN: N9905MATERIAL: 18953
BOLT, CLIP, POST, ALUMINUM, 9MM X 50MM, 15MM X 25MM RECTANGULAR HEAD,
100 PER HEAVY DUTY BOX, PER MANITOBA INRASTRUCTURE AND TRANSPORTATION
SPECIFICATION 18953_TE-045i,
ALLOY #2024-T4
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 70 09/10/2026
30,000.00 Each GSIN: N9905MATERIAL: 18955
BOLT, PANEL CLIP, ALUMINUM, BOLT SIZE 3/8 X 3/4 IN, 16 THREADS PER INCH,
5/8 IN SQUARE HEAD, ALLOY 2024-T4, AS PER MANITOBA INFRASTRUCTURE AND
TRANSPORTATION DRAWING 18955_TE-045H, 100/HEAVY DUTY BOX
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 80 09/10/2026
200.00 Each GSIN: N9905MATERIAL: 18997
BRACKET, MOUNTING, TRAFFIC SIGN, ALUMINUM, AS PER MANITOBA
INFRASTRUCTURE AND TRANSPORTATION DRAWING 18997_TE-045G
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 90 09/10/2026
1,000.00 Each GSIN: N9905MATERIAL: 18977
Z BAR, 800 MM, ALCAN DIE SHAPE #34010, ALUMINUM ALLOY 6351-T6 OR
6061-T6, AS PER MANITOBA INFRASTRUCTURE AND TRANSPORTATION DRAWING
18977_TE-045D
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 100 09/10/2026
400.00 Each GSIN: N9905MATERIAL: 18957
Z BAR, 1800 MM LONG, AS PER MANITOBA INFRASTRUCTURE AND TRANSPORTATION
DRAWING 18957_TE-045B
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 110 09/10/2026
600.000 Meter GSIN: N9540MATERIAL: 18998
H BEAM, ALUMINUM, 100 MM, ALCAN DIE #29001/CRESSONA ALUMINUM SECTION #
740004, ALLOY 6351T6 OR 6061-T6, 12 M LENGTHS
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 120 09/10/2026
50.00 Each GSIN: N9905MATERIAL: 18974
CAP, SIGN POST, SPUN ALUMINUM, 6 INCH, AS PER MANITOBA INFRASTRUCTURE
AND TRANSPORTATION DRAWING 18974_TE-045F
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 130 09/10/2026
72.000 Meter GSIN: N9905MATERIAL: 18994
I BEAM,ALUMINUM, 12 IN. ALCAN DIE # 28020 ALLOY # 6351-T6, 12 M LENGTH
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 140 09/10/2026
30.00 Each GSIN: N9905MATERIAL: 18963
POST, ALUMINUM, 152 MM OUTSIDE DIAMETER (6 IN) X 4.57 MM (15 FT) LONG,
6.4 MM (1/4 IN) WALL THICKNESS, (ALLOY 6351-T6 SEAMLESS), COMPLETE WITH
BASE PLATE, (ALLOY 6356-T6) WELDED ON ONE END, REFER TO TRAFFIC
ENGINEERING DRAWING TE-230 E
BASEPLATE:
CASTINGS PORTIONS WILL BE MACHINED AS REQUIRED, ALL CORNERS WILL BE
ROUNDED, GUSSET RIBS WILL BE A MINIMUM OF 16 MM, BASE THICKNESS WILL BE
A MINIMUM OF 22 MM, FLANGE THICKNESS WILL BE A MINIMUM OF 16 MM, POSTS
SHALL BE FINISHED, REFER TO TRAFFIC ENGINEERING DRAWING TE-230-D
PORTIONS OF THIS PURCHASE ORDER REQUIRE ITEMS TO BE ASSEMBLED BEFORE
SHIPPING, BY WELDING, THESE PORTIONS OF THE PURCHASE ORDER SHALL ONLY BE
BID ON BY COMPANIES CERTIFIED BY THE CANADIAN WELDING BUREAU TO THE
REQUIREMENTS OF CSA STANDARD W47.2 (LATEST EDITION), "CERTIFICATION OF
COMPANIES FOR FUSION WELDING OF ALUMINUM", DIVISION 2 OR BETTER, IN GOOD
STANDING, AT THE TIME OF ISSUANCE OF THIS PURCHASE ORDER
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 150 09/10/2026
55.00 Each GSIN: N9905MATERIAL: 18965
BASE PLATE, CAST ALUMINUM, 6 IN, AS PER TRAFFIC ENGINEERING PLAN TE-230D
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 160 09/10/2026
10.00 Each GSIN: N9905MATERIAL: 18996
POST, ALUMINUM, 152 MM OUTSIDE DIAMETER (6 IN) X 5.2 M (17 FT) LONG, 6.4
MM (1/4 IN) WALL THICKNESS, (ALLOY 6351-T6 SEAMLESS), COMPLETE WITH BASE
PLATE, (ALLOY 6356-T6) WELDED ON ONE END, REFER TO TRAFFIC ENGINEERING
DRAWING TE-230 E
BASEPLATE:
CASTINGS PORTIONS WILL BE MACHINED AS REQUIRED, ALL CORNERS WILL BE
ROUNDED, GUSSET RIBS WILL BE A MINIMUM OF 16 MM, BASE THICKNESS WILL BE
A MINIMUM OF 22 MM, FLANGE THICKNESS WILL BE A MINIMUM OF 16 MM, POSTS
SHALL BE FINISHED, REFER TO TRAFFIC ENGINEERING DRAWING TE-230-D
PORTIONS OF THIS PURCHASE ORDER REQUIRE ITEMS TO BE ASSEMBLED BEFORE
SHIPPING, BY WELDING, THESE PORTIONS OF THE PURCHASE ORDER SHALL ONLY BE
BID ON BY COMPANIES CERTIFIED BY THE CANADIAN WELDING BUREAU TO THE
REQUIREMENTS OF CSA STANDARD W47.2 (LATEST EDITION), "CERTIFICATION OF
COMPANIES FOR FUSION WELDING OF ALUMINUM", DIVISION 2 OR BETTER, IN GOOD
STANDING, AT THE TIME OF ISSUANCE OF THIS PURCHASE ORDER
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 170 09/10/2026
550.00 Each GSIN: N5975MATERIAL: 19009
CLIP, STORM, SIGN, AS PER MANITOBA INFRASTRUCTURE AND TRANSPORTATION
DRAWING 19009_TE-045E
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 180 09/10/2026
15.00 Each GSIN: R199DMATERIAL: 48930
POST, ALUMINUM, 152 MM OUTSIDE DIAMETER (6 IN) X 6.1 M (20 FT) LONG, 6.4
MM (1/4 IN) WALL THICKNESS, (ALLOY 6351-T6 SEAMLESS), COMPLETE WITH BASE
PLATE, (ALLOY 6356-T6) WELDED ON ONE END, REFER TO TRAFFIC ENGINEERING
DRAWING TE-230 E
BASEPLATE:
CASTINGS PORTIONS WILL BE MACHINED AS REQUIRED, ALL CORNERS WILL BE
ROUNDED, GUSSET RIBS WILL BE A MINIMUM OF 16 MM, BASE THICKNESS WILL BE
A MINIMUM OF 22 MM, FLANGE THICKNESS WILL BE A MINIMUM OF 16 MM, POSTS
SHALL BE MILL FINISHED, REFER TO TRAFFIC ENGINEERING DRAWING TE-230-D
PORTIONS OF THIS PURCHASE ORDER REQUIRE ITEMS TO BE ASSEMBLED BEFORE
SHIPPING, BY WELDING, THESE PORTIONS OF THE PURCHASE ORDER SHALL ONLY BE
BID ON BY COMPANIES CERTIFIED BY THE CANADIAN WELDING BUREAU TO THE
REQUIREMENTS OF CSA STANDARD W47.2 (LATEST EDITION), "CERTIFICATION OF
COMPANIES FOR FUSION WELDING OF ALUMINUM", DIVISION 2 OR BETTER, IN GOOD
STANDING, AT THE TIME OF THE ISSUANCE OF THIS PURCHASE ORDER
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
ITEM 190 09/10/2026
5.00 Each GSIN: N5660MATERIAL: 68138
POST, ALUMINUM, 152 MM OUTSIDE DIAMETER, (6 IN) X 9 M (29.5 FT) LONG 6.4
MM (1/4 INCH) WALL, THICKNESS C/W BASE PLATE, (ALLOY 6351-T6 SEAMLESS),
WELDED ON ONE END, REFER TO TRAFFIC ENGINEERING DRAWING 40061-1
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
NOTE: If any of the above items/features are accessories they are to be
included and installed prior to delivery. It is the suppliers
responsibility to test all systems to ensure they are functioning
properly prior to delivery.
This RFQ is subject to the Manitoba General Terms and Conditions:
https://www.gov.mb.ca/central/psc/pubs/form/MB_terms_conditions.pdf
The purchase order to be issued to the top ranked Vendor(s) is subject
to the Manitoba Purchase Order Terms and Conditions: https://www.gov.mb.
ca/central/psc/pubs/form/Manitoba_PO_Terms_Conditions.pdf
QUOTATION EVALUATION:
Generally the lowest overall price of an acceptable item in
accordance with the terms & conditions of the RFQ will be awarded
the order.
Quotations items may be evaluated SEPERATELY, based on suitability of
product offered compared to the end users needs,
description/specifications of the
product offered, delivery, price, quality of the bidder's performance in
past awards and any other terms & conditions indicated on this RFQ
Failure to provide adequate information to evaluate the item offered
may be cause for rejection of your quote by Manitoba.
PRODUCT OFFERED:
The product offered must meet the requirements and expectations for
it's intended use
If it is your intention to offer an item, which does not meet all the
specs/description as outlined, then you must indicate all intended
deviations or changes on the return quote.
QUALITY / ACCEPTABILITY:
Any product supplied must be new, unused, first quality.
Demo units will not be accepted.
All goods delivered are subject to inspection prior to delivery
acceptance. Signing of any delivery slip should not be construed as
acceptance of the product delivered. Manitoba reserves the right to
reject any product, after final inspection that does not meet the
specification or product description requested.
Manitoba reserves the right to reject any product supplied
which, upon inspection or use, is deemed by the using department to be
unacceptable for their intended use.
Products to be supplied as specified on the contract/purchase order. Any
substitutes shipped without prior written approval will be rejected at
time of delivery or held at shipper's risk pending return instructions
Products rejected by the using department will be returned to the Vendor
for full credit or replacement product at no cost to Manitoba or the
contract may be cancelled.
(unit prices include all necessary charges e.g. freight, insurance,
handling etc.)
If any charges are not included please explain in detail any/all charges
that will be extra to the unit prices quoted and that will be charged on
the invoice.
INSPECTION:
Final inspection and acceptance or rejection of the goods will be made
promptly as practicable, but failure to inspect and accept or reject
goods promptly does not mean that the Manitoba Government has accepted
these goods. The Government of Manitoba reserves the right to inspect
the goods for up to 90 days after the date of delivery.
Partial acceptance of rejection of an order does not release the Bidder
from its responsibility to complete the order.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that any bidder is the manufacturer
or an authorized distributor, dealer or retailer of the goods offered
and is authorized to sell these goods in Manitoba, Canada and upon
request will provide Manitoba with written evidence thereof.
WARRANTY:
MANUFACTURER'S WARRANTY:
State warranty of units offered (as applicable to Manitoba's use)
(Manitoba's use would usually be considered commercial application
not consumer)
Product _________ months OR _______ years
Labour _________ months OR _______ years
Please note: During the period of the warranty offered, all labour,
transportation, parts, surcharges including shipping and brokerage will
be included. The Province of Manitoba will not pay additional charges
while the item(s) offered are under the above stated warranty.
If the warranty offered is the Vendor's warranty in combination with or
in place of the Manufacturer's warranty then a complete
explanation must be provided.
WARRANTY SERVICE/LOCATION:
Potential costs associated with the location of warranty service
might be used in the evaluation of this quote
Is warranty service provided on site at our premises?
Yes___ or No____
If No<(>,<)>
Indicate the location the unit must be sent to for manufacturer's
certified and/or approved warranty service, closest to the point of
delivery, for this tender<(>,<)>
Company name_______________________
Location (city & province)______________
Do you have a toll free phone number for warranty service?
Yes______ or No______
IF YES, PLEASE PROVIDE:________________________
NON-WARRANTY FOR PARTS AND SERVICE:
Please provide details as follows for the unit(s) offered
(For occasional non-warranty service and parts purchases)
Current labour rate for in-shop service $_________ per hour
Parts and accessories charged at:
________ % discount from ____________________ prices
(indicate retail, wholesale etc.)
AFTER WARRANTY SERVICE:
Is after warranty service provider the same as above?
Yes ___ or No_____
If No please advise
Company name_______________________
Location (city & province)______________
PAYMENT TERMS:
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net thirty (30) days.
The Bidder shall specify their standard invoice term:
_____________________________
Is there any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If Yes, please specify:
_____________________________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
CANADIAN FUNDS:
Manitoba prefers to receive quotations in Canadian funds.
If the pricing offered is quoted in a currency other than Canadian then
the currency is to be clearly identified on the quote document.
ACCOUNTS RECEIVABLE ADDRESS:
Due to our computerized accounts payable system please advise if
your invoice address (accounts receivable) is the same as the address
for orders / quotes shown above
YES ____ or NO ______
If NO provide complete details i.e. box #, street address, city<(>,<)>
province, postal code, etc. _________________
MANITOBA'S RETAIL SALES TAX LICENSE:
Are you licensed by Manitoba Finance to collect and remit
Manitoba's Retail Sales Tax
YES_____ or NO_____
If NO disregard the following paragraph.
MANITOBA'S RETAIL SALES TAX:
Is the product(s) offered subject to Manitoba's Retail Sales Tax
YES____ or NO _____
If the quote consists of both taxable (T) and non-taxable ( NT) items
please indicate T or NT opposite each item offered.
YOUR QUOTATION REFERENCE # (if applicable) ________
Proposed Delivery Address:
F.O.B. DESTINATION, FREIGHT PREPAID TO:
TO BE ADVISED
TENDERS TO BE RETURNED TO:
MERX Electronic Bid Submission www.MERX.com
