Information de base

Numéro de référence

0000256260

Organisation émettrice

University of Ottawa

Organisation propriétaire

University of Ottawa

Type de projet

DDQFP - Demande de qualification des fournisseurs - préqualifications (Formel)

Numéro de projet

2023046FAC

Titre

uOttawa - RFSQ - Electrical Contractors - Power Plant Steam Turbine Upgrade

Code d’identité d’origine

PU.AC.ON.11752.C106361

Détails

Emplacement

Canada, Ontario, Ottawa

Lieu du travail

University of Ottawa

Description

This Request for Supplier Qualification (RFSQ) is an invitation by the University of Ottawa (University/Owner) to Electrical Contractors (Proponents) to submit RFSQ submissions to be prequalified for the upgrade of the steam turbine cogenerator switchgear and controls at the University of Ottawa Power Plant. The Electrical contractor will act as the general contractor for this project.
The University’s intention is to establish a shortlist of Proponents who will then be invited to submit a tender based on the contract documents for construction services of this project. The five (5) highest scoring Proponents, who achieve a minimum score of 70% with regards to the evaluation criteria, will be shortlisted, however the University reserves the right to increase or decrease the number of shortlisted Proponents based on the overall scoring of the RFSQ submissions.

Afficher davantage

Dates

Publication

2023-09-19 08h12:51 HAE

Intention de soumissionner

Non disponible

Échéance de la réception des questions

2023-09-29 15h00:00 HAE

Questions sont soumises en ligne

Non

Date de fermeture

2023-10-10 15h00:00 HAE

Information du contact

Len Gauthier

343-961-3385

lgauthi7@uottawa.ca

Processus de soumission

Type de soumission

Soumission électronique

Fixation des prix

Pas de prix

Liste de documents de la soumission

Nom de l’item	Description	Obligatoire	Limité à un fichier
Bid Documents	Documents defining the proposal	Oui	Non
Aucune entrée

Directives additionelles d’appel d’offres

Each Proponent’s Submission must include two (2) attachments (files) included in the following envelopes and labelled in the following manner:
Envelope #1 shall include:
Attachment # 1 – Mandatory Requirements
As per Article 2.2.2 of this RFSQ, the following mandatory forms, information and attachments must be completed and submitted in Attachment #1 – Mandatory Requirements:
• M1 - Appendix A – Prequalification Submission Cover
• M2 - Appendix B – Prequalification Submission Declaration Form
• M3 - Appendix C – No Conviction of Fraud Declaration Form
• M4 - Appendix D – Conflict of Interest, Ethical Conduct and Disclosure of Information Declaration Form
• M5 – Appendix E - Evidence of Insurability or valid insurance certificate
• M6 - Copy of Workplace Safety and Insurance Board coverage (WSIB)
• M7 – Consent of Surety
AND
Attachment #2 – Technical Rated Criteria
As per Article 2.2.3 of this RFSQ, the following forms, information, and attachment are to be included in attachment #2 - Technical Rated Criteria:
• 1 – Annex I – Company Profile and Organization Chart
• 2 – Proposed team for the project (narrative and resumes for proposed Project Manager and Superintendent)
• 3 - Annex II – Company Relevant Experience and References
• 4 – Annex III – Approach, Methodology and Quality Control
• 5 – Annex IV – Health and Safety

Afficher davantage

© MERX - Tous droits réservés. Aucune partie des données de ce site Web ne peut être reproduite, enregistrée ou archivée ni transmise sous aucune forme que ce soit ni par mode électronique, mécanique, par photocopie, enregistrement ou autrement, sans la permission préalable de MERX et du Ministre du gouvernement participant (si applicable). Ni MERX, ni le Ministre, ni le responsable du contrat n'assumerons quelconque responsabilité et ne serons tenus responsables de quelconque dommage pour l'exactitude de l'information contenue dans la publication.