MANITOBA REFERENCE NUMBER: MB-MBPB-03S-00041
ISSUING DEPARTMENT: Procurement and Supply Chain
DATE ISSUED: 08/12/2023
ISSUED BY: GoM PSC
TELEPHONE: 204 945-6361
The Government of Manitoba (Manitoba) is requesting bid submissions for
the supply and delivery of Flow Wrapper.
Solicitation Contact
For the purposes of this procurement process, the Solicitation Contact
will be:
Contact Name: Cindarla Pinheiro
Contact Email: bids@gov.mb.ca
For inquiries, email subject line shall be the 29684 as provided in the
first page of this document. Vendors and their representatives are not
permitted to contact any employees, officers, agents, elected or
appointed officials, or other representatives of Manitoba, other than
the Solicitation Contact, concerning matters regarding this
Solicitation. Failure to adhere to this rule may result in the
disqualification of the Vendor and the rejection of the Vendors
Submission.
Bidder must indicate if you are able to meet the requested
delivery date of March 29, 2024 yes ____ OR no ____
If NO, then indicated a realistic delivery as follows:
Delivery in ___ working days or ___weeks from receipt of the order.
F.O.B. DESTINATION, FREIGHT PREPAID TO:
Delivery to:
Food Development Center
810 Phillips St
Portage la Prairie, Manitoba
R1N 4A4
This procurement is subject to Canadian Free Trade Agreement.
GENERAL TERMS & CONDITIONS:
Bidders must "login" to MERX to access the General Terms & Conditions
which apply to this RFQ, in addition to those shown below. After
"login" follow the links: Information -> Government Publications ->
Manitoba Terms and Conditions -> Request for Quotation.
SUBMISSION TERMS AND CONDITIONS:
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Vendor's e-mail address: (if available) ____________________
Quantity clarification: quantity listed contains 2 or 3 decimals.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 29/03/2024
1.00 Each GSIN: N6600MATERIAL: 99181030
INDUSTRIAL LABORATORY EQUIPMENT AS DESCRIBED BELOW:
Flow Wrapper
- Right hand machine configuration with the product flowing from left to
right as the operator faces the control panel, OR left hand machine
configuration with the product flowing from right to left as the
operator faces the control panel.
- Utility specs: Electrical-480 volt, 3 phase, 60 Hz. Air-80 PSIG.
- Powder coated exterior and stainless steel guards.
- Category 3 safety circuit wiring.
- Standard safety features include guarding, guard safety switches,
E-stop button with E-stop relay and machine reset button, safety cable
stop on infeed conveyor and lockable main power disconnect.
- Parts manual, operator manual and control system operations manual in
PDF format and written in English.
- Demonstration and installation needed in customer's plant
Additional items:
- Casters on machine.
- Spare parts kit.
- Installation and start-up assistance for three (3) days for one (1)
Field Service Technician at customer's facility.
- Rugged frame construction and timing belt drive components for machine
durability and smooth maintenance-free operation. Sanitary cantilevered
design.
- Gray powder coated steel main frame
- Servo driven infeed conveyor. Hinged top plates on the operator side
and drop down style side covers. All parts in contact with the product
are of stainless steel or FDA-approved material.
- 5 feet of clear feeding space
- Stainless steel conveyor deck
- Appropriate side guides
- Electronic torque sensing for infeed chain drive protection.
- High product detector
- No product/no package feature, utilizing the motion control system to
detect missing product(s) in the infeed conveyor flights
- One (1) Infeed chain; standard chain with stainless steel lugs
- Cantilevered backstand with automatic core lock and independent screw
adjustment for roll centering accommodates quick roll changes.
- Single film roll
- Maximum roll width 16 inches; maximum roll diameter 16 inches; 3 inch
diameter cores.
- Adjustable "S" wrap film rolls for precise setting of film entry angle
to forming box.
- Servo controlled powered feed roll system
- Slack web detector.
- Servo controlled registration system
- Supplied thermal transfer printer including mounting brackets and
installation.
- VideoJet 6230 Thermal Transfer Printer
- 120VAC power receptacle supplied for printer
- PLS signal provided for printer timing
- Printer fault output wired to position stop machine
- Two (2) sets of fin wheels
- One (1) set of cold fin wheels
- One (1) set of hot fin wheels
- Heaters mounted in fin wheels. Brushless sealed contacts are used to
transfer heater power and thermocouple signals.
- Out of position product/no cut feature, utilizing the motion control
system to detect misplaced product(s), stop the end sealing drive, and
subsequently time and restart the drive when product(s)is(are) detected
in proper position. Film, cycle speed and application to be reviewed
prior to contract acceptance.
- One (1) Fully adjustable (height and width) former
- Two (2) Sets of knurled fin wheels
- Servo-driven cutting head assembly, Two-up cutting head.
- Heaters are mounted in crimper. Brushless sealed contacts.
- Servo drive to cutting head adjusts crimper speed to match film speed.
- Automatic position stop with crimpers in open position.
- Electronic torque sensing for cutting head drive protection.
- Two (2) Sets of vertical lined crimpers (set consists of 1 upper and 1
lower crimper)
- Two (2) Zig-zag knives
- One (1) Cutting head product support
- Straight-out belt discharge conveyor
- Extends 24 inches beyond frame.
- Drive and control package to be provided including:
- PanelView Plus 7 700 color touchscreen operator interface with
built-in PDF viewer and Ethernet communications
- CompactLogix 5000 Series PLC control
- AB Kinetix 5700 servo amplifiers with Ethernet communication
- AB VPL servo motors
- Menu-driven set-up procedure
- Two level access, one secured, one unsecured, Product per
minute display, totalizer display, production records and
fault display included
- Forty (40) record set-up storage recipe retrieval
- CE / CUL touchsafe components
- Quick disconnect sensors and actuators
- "No Homing" feature for most E-stop and guard opening condition
- Pedestal mounted electrical control station with adjustable position
for easy access by machine operation
- Internal control of three temperatures with access through PanelView
for control of each heated fin sealer assembly
- Upper crimper shaft and lower crimper shaft
- Delayed start with audible alarm provides notice that machine will
be starting
- Stainless steel electrical cabinet doors and operator control
station.
- CUL approved electrical cabinets.
Equivalent or better
Installation, commissioning and training required
To support product development
Please indicate:
Manufacturers Name________________
Brand Name______________________
Product / Style Number ________
Bidder's catalogue/reference number (if applicable) ___________
========================================================
NOTE: If any of the above items/features are accessories they are to be
included and installed prior to delivery. It is the suppliers
responsibility to test all systems to ensure they are functioning
properly prior to delivery.
QUOTATION EVALUATION:
Generally the lowest overall price of an acceptable item in
accordance with the terms & conditions of the RFQ will be awarded
the order.
Quotation items may be evaluated SEPERATELY, based on suitability of
product offered
compared to the end users needs, description/specifications of the
product offered, delivery, price, quality of the bidder's performance in
past awards and any other terms & conditions indicated on this RFQ
Failure to provide adequate information to evaluate the item offered
may be cause for rejection of your quote by Manitoba.
QUALITY / ACCEPTABILITY:
Any product supplied must be new, unused, first quality.
Demo units will not be accepted.
All goods delivered are subject to inspection prior to delivery
acceptance. Signing of any delivery slip should not be construed as
acceptance of the product delivered. Manitoba reserves the right to
reject any product, after final inspection that does not meet the
specification or product description requested.
Manitoba reserves the right to reject any product supplied
which, upon inspection or use, is deemed by the using department to be
unacceptable for their intended use.
Products to be supplied as specified on the contract/purchase order. Any
substitutes shipped without prior written approval will be rejected at
time of delivery or held at shipper's risk pending return instructions
Products rejected by the using department will be returned to the Vendor
for full credit or replacement product at no cost to Manitoba or the
contract may be cancelled.
(unit prices include all necessary charges e.g. freight, insurance,
handling etc.)
If any charges are not included please explain in detail any/all charges
that will be extra to the unit prices quoted and that will be charged on
the invoice.
WARRANTY:
MANUFACTURER'S WARRANTY:
State warranty of units offered (as applicable to Manitoba's use)
(Manitoba's use would usually be considered commercial application
not consumer)
Product _________ months OR _______ years
Labour _________ months OR _______ years
Please note: During the period of the warranty offered, all labour,
transportation, parts, surcharges including shipping and brokerage will
be included. The Province of Manitoba will not pay additional charges
while the item(s) offered are under the above stated warranty.
If the warranty offered is the Vendor's warranty in combination with or
in place of the Manufacturer's warranty then a complete
explanation must be provided.
WARRANTY SERVICE/LOCATION:
Potential costs associated with the location of warranty service
might be used in the evaluation of this quote
Is warranty service provided on site at our premises?
Yes___ or No____
If No<(>,<)>
Indicate the location the unit must be sent to for manufacturer's
certified and/or approved warranty service, closest to the point of
delivery, for this tender<(>,<)>
Company name_______________________
Location (city & province)______________
Do you have a toll free phone number for warranty service?
Yes______ or No______
IF YES, PLEASE PROVIDE:________________________
NON-WARRANTY FOR PARTS AND SERVICE:
Please provide details as follows for the unit(s) offered
(For occasional non-warranty service and parts purchases)
Current labour rate for in-shop service $_________ per hour
Parts and accessories charged at:
________ % discount from ____________________ prices
(indicate retail, wholesale etc.)
AFTER WARRANTY SERVICE:
Is after warranty service provider the same as above?
Yes ___ or No_____
If No please advise
Company name_______________________
Location (city & province)______________
GOVERNING LAWS:
Manitoba requires its suppliers to adhere to provincial labour laws and,
where businesses use sources outside of Canada, Manitoba expects
suppliers to comply with local labour laws in the country of
manufacture.
INDIGENOUS BUSINESS STANDARD FOR "GOODS WITH RELATED SERVICES"
DEFINITIONS:
"Indigenous Business" means a business that is at least 51% Indigenous
owned and controlled and, if it has six or more full-time employees, at
least one-third of its employees must be Indigenous persons.
"Indigenous Business Directory" means a business directory of Indigenous
businesses that meet Manitoba's definition of an Indigenous business.
'Indigenous Business Standard" means terms and conditions that indicate
that Indigenous business participation is desirable but not mandatory.
"Indigenous Person" means a First Nations, Non-status Indian, Métis or
Inuit person who is a Canadian citizen and resident of Canada.
INDIGENOUS PROCUREMENT INITIATIVE:
Manitoba is committed to community economic development as a key
component of its economic strategy. It intends to develop a provincial
economy that is more inclusive, equitable and sustainable.
Procurement practices are one means that can be used to contribute to
the growth of Indigenous businesses. In that regard, Manitoba developed
the Indigenous Procurement Initiative (IPI). The objective of IPI is to
increase the participation of Indigenous businesses in providing goods
and services to Manitoba.
INDIGENOUS BUSINESS STANDARD:
Indigenous participation is desired but bids will not be disqualified if
there is no Indigenous business participation.
INDIGENOUS BUSINESS DIRECTORY:
Manitoba has established a directory of Indigenous businesses called the
"Indigenous Business Directory". This directory is a list of Indigenous
businesses (including non profit organizations and economic development
corporations) that have self declared as an Indigenous Business meeting
that definition under the IPI. It is neither comprehensive nor
exhaustive but may be a useful resource to identifying Indigenous
businesses for potential partnering or sub-contracting purposes.
Indigenous businesses not listed in the Directory may also be used.
Registration in the Indigenous Business Directory does not guarantee
certification as an Indigenous business, as business status may change;
therefore formal certification is required in the formal tender process.
Indigenous businesses are encouraged to register by contacting
Procurement Services Branch.
For further information on the Indigenous Business Directory,
registration forms and access to a copy of the Indigenous Business.
Directory please see the following website:
http://www.gov.mb.ca/finance/psb/api/api bd.html or contact:
Manitoba Labour, Consumer Protection and Government Services
Procurement & Supply Chain Division
600-352 Donald St, Canada Building
Ph.: 204-945-6361
For all other general inquiries related to this tender opportunity,
please contact the name of the individual(s) identified on page one of
this tender document.
TERMINATION:
Manitoba may, in its sole discretion, immediately terminate a purchase
order/contract in writing if:
a) the vendor fails to properly fulfill, perform, satisfy and carry out
each and every one of its obligations under the purchase order/contract,
or
b) the vendor fails or refuses to comply with a verbal or written
request or direction from Manitoba within three(3) days of receiving the
request or direction; or
c) the vendor become bankrupt or insolvent or liquidates; or
d) a receiver, trustee or custodian is appointed for the assets of the
vendor, or any partner thereof; or
e) the vendor or any partner thereof makes a compromise, arrangement, or
assignment with or for the benefit of the creditors of the vendor or of
that partner, as the case may be; or
f) the vendor fails to secure or renew any license or permit for the
vendors business required by law; or any such license or permit is
revoked or suspended; or
g) the vendor or any partner, officer or director of the vendor is found
guilty of an indictable offence; or
h) the vendor fails to comply with any law or regulation relating to the
employment of its employees; or
i) the vendor at any time engages in any activities or trade practices
which, in the opinion of Manitoba, are prejudicial to the interests of
Manitoba, or a department or agency thereof; or
j) there is a breach of any provision of the purchase order/contract.
k) the goods provided by the vendor are not according to the contract or
otherwise unsatisfactory; or
l) the services provided by the vendor are unsatisfactory, inadequate,
or are improperly performed; or
m) the vendor has failed to meet the delivery date indicated on the
purchase order/contract or repeatedly failed to meet the delivery lead
time, indicated on the purchase order/contract.
REGISTRATION/FORMS:
All dealer supplied forms that are required for the Department to
register/insure the unit in Manitoba must be fully completed and
provided immediately on delivery.
PUBLICITY, MEDIA AND OFFICIAL ENQUIRIES:
Neither the bidder nor its suppliers/vendors, employees or consultants
shall make any public statement relating to the existence or performance
of the purchase order/contract without the prior written consent of the
Province of Manitoba, which shall not be unreasonably withheld.
The provision of this condition shall apply during the extension of a
purchase order/contract and indefinitely after its expiry or
termination.
CONFIDENTIALITY:
The content of this RFQ and any other information received by the Bidder
relating to the RFQ, gained through the RFQ process or otherwise, is to
be treated in strict confidentiality. The Bidder shall not disclose any
of the information in whole or in part to anyone not specifically
involved in the preparation of the Bidder's quotation, unless written
consent is secured from Manitoba prior to the said disclosure. The
obligation of each Bidder to maintain confidentiality shall survive the
expiration or the acceptance/rejection of their quotation and/or any
resulting Contract/ Agreement(s) to supply the requirements of this RFQ.
VENDOR INFORMATION:
RIGHT TO REISSUE RFQ
Manitoba reserves the right to cancel and/or reissue the RFQ where, in
Manitoba's sole opinion, none of the quotes submitted in response to the
RFQ warrant acceptance or where it would be in the best interests of
Manitoba to do so. Costs incurred in the preparation, presentation and
submission of a quote shall be borne entirely by the Bidder. Manitoba
shall not reimburse any bidders for any costs if the RFQ is cancelled or
reissued.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that any bidder is the manufacturer
or an authorized distributor, dealer or retailer of the goods offered
and is authorized to sell these goods in Manitoba, Canada and upon
request will provide Manitoba with written evidence thereof.
INVOICING AND PAYMENT:
Subject to the following subsections, in consideration the goods
provided or delivered to the satisfaction of Manitoba, Manitoba shall
pay the Contractor an amount not exceeding the amount specified in the
successful Contractor's bid submission.
All invoices shall be issued in writing and satisfactory to Manitoba in
both form and content. The contractor shall also provide to Manitoba
such supporting documents, vouchers, statements and receipts as
requested by Manitoba.
Manitoba shall endeavor to pay the Contractor any fees due within 30
days net after the receipt and approval of the invoice and any
supporting materials requested.
CANADIAN FUNDS:
Manitoba prefers to receive quotations in Canadian funds.
If the pricing offered is quoted in a currency other than Canadian then
the currency is to be clearly identified on the quote document.
ACCOUNTS RECEIVABLE ADDRESS:
Due to our computerized accounts payable system please advise if
your invoice address (accounts receivable) is the same as the address
for orders / quotes shown above
YES ____ or NO ______
If NO provide complete details i.e. box #, street address, city<(>,<)>
province, postal code, etc. _________________
MANITOBA'S RETAIL SALES TAX LICENSE:
Are you licensed by Manitoba Finance to collect and remit
Manitoba's Retail Sales Tax
YES_____ or NO_____
If NO disregard the following paragraph.
MANITOBA'S RETAIL SALES TAX:
Is the product(s) offered subject to Manitoba's Retail Sales Tax
YES____ or NO _____
If the quote consists of both taxable (T) and non-taxable ( NT) items
please indicate T or NT opposite each item offered.
PAYMENT TERMS:
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net thirty (30) days.
The Bidder shall specify their standard invoice term:
_____________________________
Is there any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If Yes, please specify:
_____________________________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
YOUR QUOTATION REFERENCE # (if applicable) ________
Proposed Delivery Address:
Delivery to:
Food Development Center
810 Phillips St
Portage la Prairie, Manitoba
R1N 4A4
TENDERS TO BE RETURNED TO:
MERX Electronic Bid Submission www.MERX.com
