MANITOBA REFERENCE NUMBER: MB-MBPB-12V-00067
ISSUING DEPARTMENT: Procurement Services Branch
DATE ISSUED: 20/12/2021
ISSUED BY: Alison Chen
TELEPHONE: 204 915-6539
The Government of Manitoba (Manitoba) is requesting bid submissions FOR
SUPPLY OF LUMBER, HARDWARE, FLOATS AND FULLY CONSTRUCTED DOCK SECTIONS.
NOTE:
For INFORMATION or item clarification, if required<(>,<)>
Procurement and Supply Chain
CONTACT: Alison Chen at alison.chen@gov.mb.ca
F.O.B Destination, Freight Prepaid to:
ITEMS 10 - 40- Hardware and Lumber
Delivery:
Conservation and Climate
Adam Lake Maintenance Yard
Hwy #10, 22km South of Boissevain, MB
Attn: Robert Clark - Phone: 204-305-0222
DELIVERY Date and Times:
Monday through Friday
8:30 am - 12:00 pm
1:00 pm - 4:30 pm
F.O.B Destination, Freight Prepaid to:
ITEMS 60 & 70 - Fully Constructed dock sections
DELIVERY
Conservation and Climate
West Hawk Lake Maintenance Yard
100 West Hawk Blvd, West Hawk Lake, MB
Attn: Amy Kirby Phone: 431-328-0007
DELIVERY HOURS:
8:30 am - 11:30 am
1:00 pm - 3:30 pm
**NO WEEKEND DELIVERIES ACCEPTED**
F.O.B. - West Hawk Lake, MB
Please contact the individual noted above if additional information or
clarification is required on the following items.
Bidder must indicate if you are able to meet the requested
delivery date of January 31, 2022 yes ____ OR no ____
If NO, then indicate a realistic delivery as follows:
Delivery in ___ working days or ____weeks from receipt of the order.
This procurement is subject to Canadian Free Trade Agreement.
INVOICING SHOULD HAVE BEEN COMPLETED BY MARCH 31, 2022.
GENERAL TERMS & CONDITIONS:
Bidders must "login" to MERX to access the General Terms & Conditions
which apply to this RFQ, in addition to those shown below. After
"login" follow the links: Information -> Government Publications ->
Manitoba Terms and Conditions -> Request for Quotation.
SUBMISSION TERMS AND CONDITIONS:
The Bid MUST be signed by a representative of the Bidder with the
authority to bind the Bidder. The name and title of the representative
signing the Bid should also be printed below their signature.
Vendor's e-mail address: (if available) ____________________
Quantity clarification: quantity listed contains 2 or 3 decimals.
_________________________________________________________________________
ITEM QTY DESCRIPTION DELIVERY
NO. DATE
========================================================
ITEM 10 31/01/2022
248.00 Each GSIN: N5510MATERIAL: 99121030
LUMBER, BUILDING AS DESCRIBED BELOW:
2"X8"X16' PWF (below grade) pressure treated boards
Please indicate:
Brand name and product # of item offered:
Manufacturers Name__________
Brand Name______________
Product / Style Number ________
Bidder's catalogue/reference number ( if applicable)
========================================================
ITEM 20 31/01/2022
66.00 Each GSIN: N5510MATERIAL: 99121030
LUMBER, BUILDING AS DESCRIBED BELOW:
2"x4"x16' PWF (below grade) pressure treated boards
Please indicate:
Brand name and product # of item offered:
Manufacturers Name__________
Brand Name______________
Product / Style Number ________
Bidder's catalogue/reference number ( if applicable)
========================================================
ITEM 30 31/01/2022
1.00 Each GSIN: N5300MATERIAL: 99301099
HARDWARE, OTHER, AS DESCRIBED BELOW:
Hinges,Plates as described below:
QTY 88 EACH -outside corner plate, 8"x8" sides, bent on 90 degrees, 5"
high x 1/8" thick, hot dipped, galvanized, with 8 holes punched to
accept 3/8" carriage bolts for bolting through 1 1/2".
QTY 88 EACH -inside corner plate, 6"x6" sides, bent on 90 degrees, 5"
high x 1/8" thick, hot dipped, galvanized, with 8 holes punched for
bolting outside corner together through 11/2" material with 3/8"
carriage bolts.
QTY 88 EACH -mending plates or rim plates, 2 ½"x5", 1/8" thick, hot
dipped galvanized with 2 holes punched to bolt through mending plate or
rim and attach angle brackets with 3/8" carriage bolts.
QTY 88 EACH -centre-joist, inside corner angle brackets,
2 ½" x 5" sides bent on 90 degrees, 5" high with 1/8" thick, hot dipped,
galvanized material, with 4 slotted holes so 2 angle brackets can be put
in both corners of a joist to rim (mending plate) application and be
bolted together through joist. Angle brackets will also be bolted
through rim joist to rim plate.
QTY 88 EACH -
Stationary dock edge connector hinge,
5 1/4"x3 1/4", 1/8" thick, hot dipped, galvanized, with 2 holes punched
to meet up with inside and outside corners when carriage bolted
together. Hinge to have tapered, bent "ears", 90 degree on sides with
3/8" hole to pass through a hitch pin with clip to secure in place.
Plate with "ears" to be made to have one fit inside the other. Depth of
hinge to be as low profile as possible and allow for differential
movement, and to keep gap between joining members as tight as possible
========================================================
ITEM 40 31/01/2022
44.00 Each GSIN: N5300MATERIAL: 99301099
HARDWARE, OTHER, AS DESCRIBED BELOW:
DOCK FLOATS
Must be rated for 550 lbs flotation capacity
Size: 24"x48"x 16"
Float must consist of Linear Virgin Polyethylene Resin with UV Ray
Inhibitors and Carbon Black Pigment Shell, with EPS Solid
Void-Free Foam Fill
Must possess recessed flanges and centre trough to allow the use of 2
foot centres
Minimum wall thickness of ¼" and up to 5/16" at fastening points making
it resistant to splits and punctures.
Minimum 10 easy to get at locations from which to attach the float to
stringers.
Please indicate:
Brand name and product # of item offered:
Manufacturers Name______________________
Brand Name_______________________
Product /Style Number ____________
Bidder's catalogue / reference number (if applicable)
INCLUDE PRODUCT SPECIFICATION SHEET.
========================================================
ITEM 60 31/01/2022
4.00 Each GSIN: N5600MATERIAL: 40162
FULLY CONSTRUCTED DOCK SECTIONS
BUILDING, PRE ENGINEERED, AS DESCRIBED BELOW:
Quantity: 4 pieces each 20 ft x 8ft floating dock structures
constructed as follows:
Painted steel dock frame to Mfr's Detail to include minimum (4) four
anchor points for securing dock in place.
Size: 24"x48"x12" Polyethylene dock floats including all dock to float
hardware - (8) eight required per dock section as shown on plan.
1/4" steel plate hinged dock-to-dock connection plates - (2) two per
end.
2"x6" pressure treated decking at 1/4" spacing. Use full board at end to
cover gap between sections.
Heavy duty dock bumpers to all sides of each dock section as shown on
plan.
Notes:
Builder to observe all best practices and building codes for dock
construction.
All hardware to be suitable for use with pressure treated lumber.
Pricing to include heavy duty dock bumpers to all exposed sides of
docks.
Pricing to include chains and anchors for all dock sections. Bidder to
size appropriately.
Please review design attachment for information purposes only labeled:
Fully Constructed Dock Sections.
========================================================
ITEM 70 31/01/2022
2.00 Each GSIN: N5600MATERIAL: 40162
FULLY CONSTRUCTED DOCK SECTIONS
BUILDING, PRE ENGINEERED, AS DESCRIBED BELOW:
Quantity: 2 pieces each 24ft x 4ft floating dock structures with 45
degree angle ends constructed as follows:
Painted steel dock frame to Mfr's Detail to include minimum (4) four
anchor points on underside for securing in place.
Size: 24"x48"x12" Polyethylene dock floats including all dock to float
hardware - (6) six required per dock section as shown on plan.
1/4" steel plate hinged dock-to-dock
Connections - (2) two at one end.
2"x6" pressure treated decking at 1/4" spacing.
Heavy duty dock bumpers to all sides as shown on plan.
Notes:
Builder to observe all best practices and building codes for dock
construction.
All hardware to be suitable for use with pressure treated lumber.
Pricing to include heavy duty dock bumpers to all exposed sides of
docks.
Pricing to include chains and anchors for all dock sections. Bidder to
size appropriately.
Please review design attachment for information purposes only labeled:
Fully Constructed Dock Sections.
========================================================
PLEASE NOTE THE FOLLOWING:
QUOTATION EVALUATION:
Generally the lowest overall price of an acceptable item(s) in
accordance with the terms & conditions of the RFQ will be awarded the
order.
Quotations will be evaluated based on suitability of unit offered
compared to the end users needs, product specifications, price,
delivery, quality of the bidder's performance in past awards and any
other terms & conditions indicated on this RFQ.
EACH PROPOSED ITEM WILL BE EVALUATED SEPARATELY. MANITOBA RESERVES THE
RIGHT TO ACCEPT OR REJECT EACH ITEM SEPARATELY. THERE MAY BE MULTIPLE
AWARDS AS A RESULT.
Suitability evaluation to be at Manitoba's sole discretion.
Failure to provide adequate information to evaluate the item offered may
be cause for rejection of your quote by the Manitoba
Government(Manitoba).
PRODUCT OFFERED:
The product offered must meet the requirements and expectations for it's
intended use.
If it is your intention to offer an item, which does not meet all the
specs/description as outlined, then you must indicate all intended
deviations or changes on the return quote.
QUALITY / ACCEPTABILITY:
Any product supplied must be new, unused, first quality.
All goods delivered are subject to inspection prior to delivery
acceptance. Signing of any delivery slip should not be construed as
acceptance of the product delivered. Manitoba reserves the right to
reject any product, after final inspection that does not meet the
specification or product description requested.
Manitoba reserves the right to reject any product supplied which, upon
inspection or use, is deemed by the using department to be unacceptable
for their intended use.
Products to be supplied as specified on the contract/purchase order.
Any substitutes shipped without prior written approval will be rejected
at time of delivery or held at shippers risk pending return instructions
Products rejected by the using department will be returned to the Vendor
for full credit or replacement product at no cost to Manitoba or the
contract may be cancelled.
ITEMS 10 - 40- Hardware and Lumber
Delivery:
Conservation and Climate
Adam Lake Maintenance Yard
Hwy #10, 22km South of Boissevain, MB
Attn: Robert Clark - Phone: 204-305-0222
DELIVERY Date and Times:
Monday through Friday
8:30 am - 12:00 pm
1:00 pm - 4:30 pm
ITEMS 60 & 70 - Fully Constructed dock sections
DELIVERY - Required by January 31, 2022
Conservation and Climate
West Hawk Lake Maintenance Yard
100 West Hawk Blvd, West Hawk Lake, MB
Attn: Amy Kirby Phone: 431-328-0007
DELIVERY HOURS:
8:30 am - 11:30 am
1:00 pm - 3:30 pm
**NO WEEKEND DELIVERIES ACCEPTED**
F.O.B. - West Hawk Lake, MB
Unit prices include all necessary charges (e.g. freight, insurance,
handling etc.)
If any charges are not included please explain in detail any/all charges
that will be extra to the unit prices quoted and that will be charged on
the invoice.
INSPECTION:
Final inspection and acceptance or rejection of the goods will be made
promptly as practicable, but failure to inspect and accept or reject
goods promptly does not mean that the Manitoba Government has accepted
these goods. The Government of Manitoba reserves the right to inspect
the goods for up to 90 days after the date of delivery.
Partial acceptance of rejection of an order does not release the Bidder
from its responsibility to complete the order.
COSTS:
Costs incurred in the preparation, presentation and submission of a Bid
shall be borne entirely by the Bidder.
GOVERNING LAWS:
Manitoba requires its suppliers to adhere to provincial labour laws and,
where businesses use sources outside of Canada, Manitoba expects
suppliers to comply with local labour laws in the country of
manufacture.
TERMINATION:
Manitoba may, in its sole discretion, immediately terminate a purchase
order/contract in writing if:
a) the vendor fails to properly fulfill, perform, satisfy and carry out
each and every one of its obligations under the purchase order/contract,
or
b) the vendor fails or refuses to comply with a verbal or written
request or direction from Manitoba within three(3) days of receiving the
request or direction; or
c) the vendor become bankrupt or insolvent or liquidates; or
d) a receiver, trustee or custodian is appointed for the assets of the
vendor, or any partner thereof; or
e) the vendor or any partner thereof makes a compromise, arrangement, or
assignment with or for the benefit of the creditors of the vendor or of
that partner, as the case may be; or
f) the vendor fails to secure or renew any license or permit for the
vendors business required by law; or any such license or permit is
revoked or suspended; or
g) the vendor or any partner, officer or director of the vendor is found
guilty of an indictable offence; or
h) the vendor fails to comply with any law or regulation relating to the
employment of its employees; or
i) the vendor at any time engages in any activities or trade practices
which, in the opinion of Manitoba, are prejudicial to the interests of
Manitoba, or a department or agency thereof; or
j) there is a breach of any provision of the purchase order/contract.
k) the goods provided by the vendor are not according to the contract or
otherwise unsatisfactory; or
l) the services provided by the vendor are unsatisfactory, inadequate,
or are improperly performed; or
m) the vendor has failed to meet the delivery date indicated on the
purchase order/contract or repeatedly failed to meet the delivery lead
time, indicated on the purchase order/contract.
PUBLICITY, MEDIA, OFFICIAL ENQUIRIES AND ADVERTISING:
Neither the bidder nor its suppliers/vendors, employees nor consultants
shall make any public statement making reference to, or relating to the
existence or performance of the purchase order/contract in any
advertising, testimonials or promotional material without the prior
written consent of the Province of Manitoba, which shall not be
unreasonably withheld.
The provision of this condition shall apply during the extension of a
purchase order/contract and indefinitely after its expiry or
termination.
CONFIDENTIALITY:
The content of this RFQ and any other information received by the Bidder
relating to the RFQ, gained through the RFQ process or otherwise, is to
be treated in strict confidentiality. The Bidder shall not disclose any
of the information in whole or in part to anyone not specifically
involved in the preparation of the Bidder's quotation, unless written
consent is secured from Manitoba prior to the said disclosure. The
obligation of each Bidder to maintain confidentiality shall survive the
expiration or the acceptance/rejection of their quotation and/or any
resulting Contract/ Agreement(s) to supply the requirements of this RFQ.
VENDOR INFORMATION:
RIGHT TO REISSUE RFQ:
Manitoba reserves the right to cancel and/or reissue the RFQ where, in
Manitoba's sole opinion, none of the quotes submitted in response to the
RFQ warrant acceptance or where it would be in the best interests of
Manitoba to do so. Costs incurred in the preparation, presentation and
submission of a quote shall be borne entirely by the Bidder. Manitoba
shall not reimburse any bidders for any costs if the RFQ is cancelled or
reissued.
AUTHORIZED VENDOR:
Manitoba reserves the right, prior to any contract award, to secure
evidence to Manitoba's satisfaction that any bidder is the manufacturer
or an authorized distributor, dealer or retailer of the goods offered
and is authorized to sell these goods in Manitoba, Canada and upon
request will provide Manitoba with written evidence thereof.
INDIGENOUS BUSINESS STANDARD FOR "GOODS WITH RELATED SERVICES"
DEFINITIONS:
"Indigenous Business" means a business that is at least 51% Indigenous
owned and controlled and, if it has six or more full-time employees, at
least one-third of its employees must be Indigenous persons.
"Indigenous Business Directory" means a business directory of Indigenous
businesses that meet Manitoba's definition of an Indigenous business.
"Indigenous Business Standard" means terms and conditions that indicate
that Indigenous business participation is desirable but not mandatory.
"Indigenous Person" means a First Nations, Non-status Indian, Métis or
Inuit person who is a Canadian citizen and resident of Canada.
INDIGENOUS PROCUREMENT INITIATIVE:
Manitoba is committed to community economic development as a key
component of its economic strategy. It intends to develop a provincial
economy that is more inclusive, equitable and sustainable. Procurement
practices are one means that can be used to contribute to the growth of
Indigenous businesses. In that regard, Manitoba developed the Indigenous
Procurement Initiative (IPI). The objective of IPI is to increase the
participation of Indigenous businesses in providing goods
and services to Manitoba.
INDIGENOUS BUSINESS STANDARD:
Indigenous participation is desired but bids will not be disqualified if
there is no Indigenous business participation.
INDIGENOUS BUSINESS DIRECTORY:
Manitoba has established a directory of Indigenous businesses called the
"Indigenous Business Directory". This directory is a list of Indigenous
businesses (including non profit organizations and economic development
corporations) that have self declared as an Indigenous Business meeting
that definition under the IPI. It is neither comprehensive nor
exhaustive but may be a useful resource to identifying Indigenous
businesses for potential partnering or sub-contracting purposes.
Indigenous businesses not listed in the Directory may also be used.
Registration in the Indigenous Business Directory does not guarantee
certification as an Indigenous business, as business status may change;
therefore formal certification is required in the formal tender process.
Indigenous businesses are encouraged to register by contacting
Procurement & Supply Chain.
For further information on the Indigenous Business Directory<(>,<)>
registration forms and access to a copy of the Indigenous Business
Directory please see the following website:
http://www.gov.mb.ca/finance/psb/api/api bd.html or contact:
Manitoba Central Services
Procurement & Supply Chain Division
600 - 352 Donald Street
General Inquiry Line
Ph: 204-945-6361
Fax: 204-945-1455
For all other general inquiries related to this tender opportunity,
please contact the name of the individual(s) identified on page one of
this tender document.
INVOICING AND PAYMENT:
Subject to the following subsections, in consideration the goods
provided or delivered to the satisfaction of Manitoba, Manitoba shall
pay the Contractor an amount not exceeding the amount specified in the
successful Contractor's bid submission.
All invoices shall be issued in writing and satisfactory to Manitoba in
both form and content. The contractor shall also provide to Manitoba
such supporting documents, vouchers, statements and receipts as
requested by Manitoba.
Manitoba shall endeavor to pay the Contractor any fees due within 30
days net after the receipt and approval of the invoice and any
supporting materials requested.
PAYMENT TERMS:
Manitoba will consider Early Payment Terms. Manitoba's standard payment
term is net thirty (30) days.
The Bidder shall specify their standard invoice term:
_____________________________
Is there any applicable discounts for early payment?
Yes _____ No _____ Initial __________
If Yes, please specify:
_____________________________________________________
Does your early payment clause appear on your invoice?
Yes _____ No _____ Initial __________
CANADIAN FUNDS:
Manitoba prefers to receive quotations in Canadian funds.
If the pricing offered is quoted in a currency other than Canadian then
the currency must be clearly identified on the quote document.
ACCOUNTS RECEIVABLE ADDRESS:
Due to our computerized accounts payable system please advise if
your invoice address (accounts receivable) is the same as the address
for orders / quotes shown above
YES ____ or NO ______
If NO provide complete details i.e. box #, street address, city<(>,<)>
province, postal code, etc.
_________________
MANITOBA'S RETAIL SALES TAX LICENSE:
Are you licensed by Manitoba Finance to collect and remit
Manitoba's Retail Sales Tax
YES_____ or NO_____
If NO disregard the following paragraph.
MANITOBA'S RETAIL SALES TAX:
Is the product(s) offered subject to Manitoba's Retail Sales Tax
YES____ or NO _____
If the quote consists of both taxable (T) and non-taxable ( NT) items
please indicate T or NT opposite each item offered.
YOUR QUOTATION REFERENCE # (if applicable) _________
Proposed Delivery Address:
ITEMS 10 - 40- Hardware and Lumber
Delivery:
Conservation and Climate
Adam Lake Maintenance Yard
Hwy #10, 22km South of Boissevain, MB
Attn: Robert Clark - Phone: 204-305-0222
DELIVERY Date and Times:
Monday through Friday
8:30 am - 12:00 pm
1:00 pm - 4:30 pm
ITEMS 60 & 70 - Fully Constructed dock sections
DELIVERY - Required by January 31, 2022
Conservation and Climate
West Hawk Lake Maintenance Yard
100 West Hawk Blvd, West Hawk Lake, MB
Attn: Amy Kirby Phone: 431-328-0007
DELIVERY HOURS:
8:30 am - 11:30 am
1:00 pm - 3:30 pm
**NO WEEKEND DELIVERIES ACCEPTED**
F.O.B. - West Hawk Lake, MB
TENDERS TO BE RETURNED TO:
MERX Electronic Bid Submission www.MERX.com
