Information de base

Numéro de référence

0000159707

Organisation émettrice

JR Cousin Consultants Ltd

Organisation propriétaire

Northwest Angle 33 First Nation

Type de projet

DPQ - Demande de pré-qualification (Formel)

Numéro de projet

N-749.2

Titre

Pre-Qualilification for the Construction of the NWA33FN Angle Inlet Water System

Code d’identité d’origine

PP.CO.MB.1018161.C102533

Détails

Emplacement

Canada, Ontario

Lieu du travail

Northwest Angle 33 First Nation, Angle Inlet, Ontario

Description

The Northwest Angle 33 First Nation is proceeding with a new water systems project within the community of Angle Inlet. Angle Inlet is a remote community accessible only via boat and winter road, approximately 60 km south west of Kenora on Lake of the Woods. To meet the project schedule, some of the materials will be required to be shipped by barge. The construction schedule will allow some materials to be shipped to the community by winter road.
The scope of work consists of:

Construction of a new water treatment plant and underground concrete reservoir. The building will be a pre-engineered steel building with a building footprint of 13.7 m x 18.3 m.
Water treatment plant including installation of pre-purchased Delco NF membrane treatment equipment. The equipment consists of 2 independent skids, each with a water treatment capacity of 249 cubic metres per day. (Delco proposal – 3.47 L/s *60min/s * 60 min/hr * 20 working hours/day)
Installation of mechanical and electrical systems inside the water treatment plant.
- Mechanical systems include raw water, distribution, backwash, booster and chemical pumps, process piping, and HRV installation
- Electrical systems include building PLC, MCC, motor starters and exterior genset.
Underground piping works including the following approximate quantities
- 2,540 m of watermain piping
- 1,965 m of water service line piping with residential pipe connections
- Two - 370 m raw water intake pipes connecting to a common intake screen in Lake of the Woods
- 350 m water treatment plant reject line including outfall structure in Lake of the Woods
- 2,930 cubic metres of rock blasting
Decommissioning of the 2 existing water treatment plants in Angle Inlet.
Installation of individual treatment systems for 5 homes including water intake, new shed for water treatment equipment including sand filter, depth filter, ion exchange filter and UV disinfection.

Works are expected to be tendered in November 2019 and construction is expected to be completed by March 31, 2021. The goal of the project is to lift the existing boil water and do not consume advisories.

Interested General Contractors who have expertise in water treatment plant construction and underground piping, specifically in remote communities, are invited to submit one hard copy and one PDF copy of Pre-Qualification Documents (15 pages maximum excluding resumes), each comprising of the following:

Completed Contractor’s Qualification Statement (CCDC 11-2018), including:
- Resumes of supervisory personnel to be assigned to the project.
- Detailed listing of work to be performed by General Contractor own forces and by sub-contractors.
Specific information on water treatment plant projects (minimum of 3 projects) completed with a minimum of one water treatment plant project on a remote First Nation communities without year round road access in the past 7 years. Provide references and contact information for each project.
Description of methodology for maximizing local content, including past experience and percentage of local content utilized.

Any submission failing to comply with all these requirements is subject to disqualification.

General Contractors may be requested to attend an interview with Northwest Angle 33 First Nation, Colliers Project Leaders and the Consultant prior to the completion of the pre-qualification process. References will be contacted as part of the evaluation.

Sealed submissions clearly marked:

Pre-Qualification of General Contractors for the Northwest Angle 33 First Nation – Angle Inlet Water System

will be received until 2:00 p.m. local time on October 3, 2019 at J. R. Cousin Consultants Ltd., 91A Scurfield Blvd, Wpg, MB. Email submissions to jrcousin@jrcc.ca are acceptable, provided the hard copy follows within 2 business days of the closing date. Facsimile or late submissions will not be accepted or considered.

The Northwest Angle 33 First Nation reserves the right to accept any or all submissions and/or to re-issue this RFPQ to additional proponents as needed to ensure adequate competition. Only those General Contractors which the Northwest Angle 33 First Nation deemed qualified from this pre-qualification process will be invited to submit tender bids for this project.

Afficher davantage

Dates

Publication

2019-09-11 13h49:36 HAC

Intention de soumissionner

Non disponible

Questions sont soumises en ligne

Non

Date de fermeture

2019-10-03 14h00:00 HAC

Information du contact

Jason Cousin, P.Eng.

204-489-0474

jrcousin@jrcc.ca

Processus de soumission

Type de soumission

Soumission physique

© MERX - Tous droits réservés. Aucune partie des données de ce site Web ne peut être reproduite, enregistrée ou archivée ni transmise sous aucune forme que ce soit ni par mode électronique, mécanique, par photocopie, enregistrement ou autrement, sans la permission préalable de MERX et du Ministre du gouvernement participant (si applicable). Ni MERX, ni le Ministre, ni le responsable du contrat n'assumerons quelconque responsabilité et ne serons tenus responsables de quelconque dommage pour l'exactitude de l'information contenue dans la publication.